It’s important to be aware of the dangers of leaving your weed eater lying around where it can easily get trodden on and damaged. You don’t want to risk damaging your weed eater by putting it away incorrectly, so it should only ever hang out on the wall in a garage or other storage area. So, there’s not much work if you have an electric weed eater plugged into the wall. Just clean all of its parts and neatly put it at any storage place with its cords wrapped around it. Make sure the storage place is dry and away from excess sunlight. However, they use batteries which you have to remove before storing them.
And is ideal for gardening tools, ladders, and lawn equipment. I like to keep a relatively clean garage so before I break open the weed eater for surgery, I like to spray it down with a garden hose or pressure washer. When storing your weed eater, the first thing you should do is remove any fuel from the tank. It can cause leaks, and gasoline will deteriorate after six months unless stabilizer chemicals have been added in advance. Leaving leave fuel in the carburetor can also compromise the new fuel that you’ll put when using the line trimmer again. Add gasoline stabilizer to the engine, to prevent drying of seals and gaskets.
Take time to ensure that the space where you hang the corded electric trimmer is clear of moisture and away from direct sunlight. Though you won’t run the risk of leaking engine fluids with an electric model, the guard at the bottom of your trimmer is a bit too fragile java_home does not point to a valid jvm installation to hang from. As I mentioned in the previous section, you don’t want to risk damaging the cutting side of your trimmer. The best place to keep your weed whacker is in an unoccupied area of your garage or shed, but one that’s easy to reach at the same time.
Next, remove, inspect and clean or change the spark plug. This will help insure a quick start, smooth running and help with the fuel efficiency of the motor. After the engine has cooled down, remove and inspect the air filter as well as the fuel filter . Inspect the fuel lines and insure that they are still soft and pliable. Cracked, brittle, or broken fuel lines should be replaced immediately. I have no desire to build a shed at the moment and having one built locally for me was, in my opinion, worth it.
Enjoyed your storage solutions to get the most out of the space. I am wrapping up a shed build to get lawn equipment out of the garage (and the chemicals out too so when my boys are out with me they aren’t messing with that stuff). Man, you just made me realize how badly I need a garden shed to get all the gardening and Lawn care crap out of my workshop. I had no clue we had this much lawn and garden equipment until I put it all in one place. Before making anything for the inside of the shed I gathered everything that would go on the inside.
He simply screwed a series of U-bolts to the garage door metal support straps and inserted the fishing rods. As the door travels, the U-bolts provide ample clearance for the rods to safely rotate without binding. Remember to fully recharge the battery at some point during the winter months, that way you’ll ensure a flying start to the season. Send me exclusive offers, unique gift ideas, and personalised tips for shopping and selling on Etsy.
Filling up on oil, checking air filters and syncing the all wheel drive are some of the things you may want to consider checking. When you service a lawn mower, be sure to empty out all of the petrol. Leaving petrol in the tank during storage may lead to a hard starting engine. Finally, I like to place a very light coat of WD-40 on all of the metal parts to help prevent rust.
Create these hangers on the wall and get those all important bins off the floor and out of the way! Build your own bike rack and keep the bike out of the way and easy to access. If you’ve ever stored elastic tie-down cords in a bag or box, you know how quickly they can become entangled. To keep them tidy, take the advice of Club member Don Harris of Woodstock, Georgia, and build this simple organizer from scrap plywood. Just measure the lengths of the cords and cut varying stepped increments to accommodate. Club member Jeff Johnson of Ashland, Wisconsin, put the inside face of his garage door to use as a convenient place to store his numerous fishing rods.
The gas weed eater has been around for many decades and uses either gas or a mixture of oil and gas to power it. Gas-powered weed eaters provide the most power and run time for large jobs compared to the battery-operating weed eaters. Proper storage is essential to keep your yard tools running.